OUR DRYWALL FINISHING TOOLS
Don’t risk your professional reputation to anything less than the best — TapeTech Drywall Finishing Tools! Click here for our Drywall Taping Tools.
THE TAPETECH DRYWALL FINISHING TOOL LINEUP:
FLAT BOXES
Automatically dispenses the proper amount of joint compound and feathers the edges in one pass.
- Three box sizes available — 7”, 10” and 12” (175mm, 250mm, 300mm).
- User adjustable blade holder fine tunes the crown for proper compound distribution.
- Standard and high-capacity EasyClean® versions.
Ops Guide | Schematics 7" 10" 12"
Back to Top
EASYCLEAN® BOXES
Designed to be easily cleaned even with quick setting compounds.
- Adjustable, hardened stainless-steel blade trowels the compound and feathers the edge.
- Increased mud capacity for improved speed and efficiency.
- Access to mud chamber is maximized, making it extremely easy to clean and maintain.
- Three sizes available — 7”, 10”, 12” (175mm, 120mm, 300mm).
Ops Guide | Schematics 7" 10" 12"
POWER ASSIST® BOXES
Spring-assisted pressure plate reduces effort required to apply joint compound and feather the edges in one pass — coating joints has never been easier.
- TapeTech is the only manufacturer providing this innovative design.
- Less worker effort required.
- Large joint compound capacity.
- Long-lasting user-adjustable blade holder fine tunes the crown for proper compound distribution.
- Three sizes available — 7”, 10” 12” (175mm, 120mm, 300mm).
Ops Guide | Schematics 7" 10" 12"
Back To Top
BRAKE HANDLES
The brake handles provide the means to properly control the Flat, EasyClean® and Power Assist® boxes. 
- Engage the brake lever to stop the box from pivoting so it can be cleanly swept off the joint.
- Available in four lengths: #8034TT is 34” (.86m), #8042TT is 42” (1.06m), #8054TT is 54” (1.4m), and #8072TT is 72” (1.8m)
Ops Guide | Schematics
EASYFINISH® BREAK HANDLES
The EasyFinish break handles provide the means to properly controls the Flat, EasyClean and Power Assist boxes. The ergonomic • “bent” EasyFinish design increases leverage for ease of use
Engage the brake lever to stop the box from pivoting so it can be cleanly swept off the joint.
- Available in four lengths: #8134TT is 34” (.86m), #8142TT is 42” (1.06m), #8154TT is 54” (1.4m), and #8172TT is 72” (1.8m)
Ops Guide | Schematics
XTENDER® HANDLE
TapeTech’s new extendable brake handle is the strongest extendable brake handle available. (Independent test results available upon request).
New profile is lighter, yet the tool is nearly 2x stronger.- Longest extension handle available – from 41” (1.041m) to 63” (1.6m).
- Adjustable grip fits any grip size
- The extension adjuster is situated for easy actuation.
Ops Guide | Schematics
Back to Top
CORNER FINISHERS
Used after the Corner Roller to bed the tape into inside corner joints, and remove excess joint compound in one pass. Also Used with the MudRunner® or Corner Applicator to finish joints by feathering both edges in one pass.
- Spring-loaded action compensates for imperfect angles.
- TapeTech provides 3 versions of this convenient tool.
- 3” (75mm) and 3.5" (90mm) EasyRoll® Adjustable, 2” (50mm) and 3” (75mm) standard.
Ops Guide | Schematics 2" 3" 3"EasyRoll 3.5" EasyRoll
MUDRUNNER®
Delivers joint compound to corner tools with precision control and low effort — an easier and faster way to finish high-quality corners.
- Only the leader, TapeTech, has this innovative design.
- Twist-grip flow control works equally well for right-handers or left-handers.
- Reaches high angles from the floor.
Ops Guide | Schematics
Back to Top
CORNER APPLICATORS
Supplies joint compound to the corner tools.
- Attaches directly to Corner Finishers and Mud Heads.
- Ball joint allows flexible positioning.
- Sizes — 7” (175mm) & 8” (200mm).
- Reach high angles safely from the floor.
Ops Guide | Schematics 7" 8"
NAIL SPOTTERS
Smaller, lighter version of the flat boxes used to cover nail or screw head depressions, removing the excess joint compound at the same time.
- Fills an entire row of dimples in one pass.
- Two tool sizes to work on any job – 2” (50mm) and 3” (75mm).
- Rugged stainless steel construction.
- Uses skid instead of wheels to extend blade life
Ops Guide | Schematics 2" 3"
Back to Top