Drywall Taping Tools

OUR DRYWALL TAPING TOOLS

Don’t risk your professional reputation to anything less than the best — TapeTech Drywall Taping Tools! Click here to see out Drywall Finishing Tools

THE TAPETECH DRYWALL TAPING TOOL LINEUP:

Simultaneously applies tape and correct amount of joint compound for all drywall joints — drastically improves taping efficiency.

• Stainless steel and gold anodized aluminum for light weight and durability.
• Reaches 10’ (3m) ceilings without the need for stilts, benches or scaffolding.
• Smoothest operating automatic taper available.
• Designed to be easily cleaned and maintained.

STAINLESS STEEL CORNER ROLLER 
The stainless steel corner roller attaches to the “HR” support handle. It is used to embed the tape firmly into the corner in preparation for using the corner finisher.

• Lightweight and fast tool to bed the tape into inside corners forming a sharp corner at the same time.
• Unique rollers are the easiest to clean.
• Can embed tape in 10-foot high (3m) corners while standing on the floor.

Ops Guide | Schematics

CORNER FINISHER
Used after the Corner Roller to bed the tape into inside corner joints, and remove excess joint compound in one pass. Also Used with the MudRunner® or Corner Applicator to finish joints by feathering both edges in one pass.

• Spring-loaded action compensates for imperfect angles.
• TapeTech provides 3 versions of this convenient tool.
• 3” (75mm) and 3.5" (90mm) EasyRoll® Adjustable, 2” (50mm) and 3” (75mm) standard.

Ops Guide | Schematics 2" 3" 3"EasyRoll 3.5" Easy Roll

Back to Top

EASYCLEAN® PUMP
The fast, light and dependable way to fill your TapeTech tools with joint compound.

• Gold anodized for added durability.
• Low friction components provide increased suction.
• Attachments (sold separately) allow filling of all TapeTech tools. (Requires Filler Attachment and/or Gooseneck)
• Coarse and fine screens available.
• EasyClean® feature with removable tube making it extremely easy to clean and maintain.

Ops Guide | Schematics

GOOSENECK AND FILLER ATTACHMENT
Serves as the fill connection EasyClean® Pump and TapeTech Automatic Taping and Finishing Tools.

• Gooseneck used to fill automatic taper.
• Filler used to fill Flat, EasyClean® and Power Assist® boxes, nail spotters, corner applicators, and the MudRunner®.

Ops Guide (Filler Attachment Ops w/Pump) | Schematics GooseneckFiller

Back to Top

MUD HEADS
The 6 profiles of MudHeads are attached to the MudRunner for applying a base coat prior to installing cornerbead and are designed to work with nearly all shapes of cornerbead. The MudHeads make installing cornerbead simpler than ever.

• Outside 90-degree
• Inside 90-degree
• Outside offset angle
• Inside offset angle
• Bullnose
• Flat profile for miscellaneous use such as L-trim

Ops Guide | Schematics



OUTSIDE CORNER ROLLERS
The Outside Corner Rollers are used to remove the excess joint compound from beneath the freshly applied cornerbead.

• Available with two caster profiles.
• One has long casters and is for plastic-reinforced cornerbead.
• One has shorter casters and is best-suited for use with steel-reinforced cornerbead.

Ops Guides | Schematics

Back to Top